Weld Mount fastening system

Weld Mount starter kit is an easy solution for ordering the most popular product at a welcome price.

Tandem cartridge 1:1, suitable mixing tip 684200. Optimal for production use. The adhesive works e.g. on fibreglass and metal bases.

Tandem cartridge 1:1, suitable mixing tip 684200. AT-8040 is a special acrylic adhesive that holds all Weld Mount parts on a vertical or above surface. The parts do not slide or need other installation auxiliaries.

Manual adhesive gun 50ml, with mixing ratios of 1:1, 2:1, 4:1, and 10:1.

Fits adhesive cartridges 684100 and 684105.

A gluable wire tie mount. Suitable for wire ties whose width is max. 5 mm.

A gluable wire tie mount. The mount can hold a 8.5mm wide wire tie.

This tie has an anodized aluminium foot and a nylon tie, The tie can turn through 360°, which facilitates positioning the tie to the cable set.

Can be used with RST or nylon mounts, with width max. 8.5 mm.

A gluable strap mount e.g. for strap mounting batteries and tanks, heavy hoses and cables, and for other webbings.

A gluable threaded stud with an M4 thread. These small stainless stud are suitable for several applications.

A gluable threaded stud with an M5 thread. The stud are especially suited for cable holders and for fastening pieces that require a small-diameter pin.

A gluable threaded stud with an M6 thread. Our stainless studs can be mounted on nearly any surface with the help of our adhesives.

A gluable threaded stud with an M8 thread. Our studs are designed for heavy loads, such as for mounting filters, panels and signs.

A gluable threaded stud with an M10 thread. Our studs are designed for heavy loads, such as for mounting filters, panels and signs.

The gluable threaded nut floats are designed for thru-holes and thin materials. The rubber piece keeps the part in place when the adhesive is drying. The rubber also keeps the threads clean during installation.

Our threaded standoff bases made of RST AISI 316 steel can be fastened on any nearly surface.

The hose and cable mounts are available as single version (double version available per request).