The integration of the controller results in the following advantages:

  • Very compact design despite integrated controller
  • Easy installation and maintenance free
  • Software for easy setup
  • Internal stroke limitation
  • Adjustable current limit
  • Internal heat protection
  • Industrial interface MODBUS RTU on RS485
  • Adjustable start ramp
  • Adjustable stop ramp
  • Plug & Play solution with iConnect-Box

The integrated control is offered in 6 versions.
All have one MODBUS-RTU system based on RS485: 

  • SDB (SINGLE DIRECTION BASIC)
    Simple control to move the actuator up and down. In combination with the iConnect-Box, it develops into a plug-and-play solution. Just plug in and run.

  • SDH (SINGLE DIRECTION HALL)
    Compared to the SDB controller, this controller also emits a Hall signal

  • SDP (SINGLE DIRECTION POSITION)
    This controller also outputs an analog position signal (0V-5V or 0V-10V)

  • SPP (SINGLE POSITION POSITION)
    With this controller, a specific position can be controlled via an analog voltage signal

  • SBS (SINGLE BUS STATUS)
    This controller is operated completely via Modbus-RTU RS485

  • MDO (MULTIPLE DIRECTION OVERRIDE)
    With this controller, up to 8 actuators can easily be operated synchronously

FEATURES:

  • Stroke: 50, 100, 150, 200, 250, 300, 350, 400, 500 and 750mm (others on request)
  • Materials:
    Motor and actuator tube are powder coated steel or stainless steel
    Piston rod is aluminum
  • Protection class: IP66 (standard), harsh environment (according IP68 and IP69)
  • Temperature:
    Operation: -20ºC to +70ºC
    Storage: -40ºC to +70ºC
  • Cable: Cores: 2 x AWG22 + 6 x AWG28, Ø = 4,8 mm (on request: 2 x AWG16 + 6 x AWG 26, Ø = 6,8 mm), black jacket, Molex Mini-Fit Jr. 8 pin or similar
  • Max. static load/self locking force: 5400N, depending on stroke length for push-applications
  • Duty cycle: Max. 10% or 2 minutes in use followed by 18 minutes rest

 

SPEED AND FORCES

24VDC (max 28VDC) - Current at maximum load: 1,8A

 Gear ratio C D E F G H
 Force (dyn. push and pull) [N] 120   400   600   900   1600   2200  
 Speed at maximum load [mm/s] 33 16 12 7,5 4 3
 Max. load limited for stroke length >400mm: 1000N  


12VDC (max 14VDC) - Current at maximum load: 3,6A

 Gear ratio C D E F G H
 Force (dyn. push and pull) [N]         400   600   900   1500   2000  
 Speed at maximum load [mm/s]   16 9 7,5 3,5 2,5
 Max. load limited for stroke length >400mm: 1000N

  

SPEED/FORCE (24VDC)

Nopeus voima 24

FORCE/CURRENT (24VDC)

Voima virta 24

SPEED/FORCE (12VDC)

Nopeus voima 12

FORCE/CURRENT (12VDC)

Voima virta 12
Mitat e 35
  EL UL/EN60.601       Harsh environment     
 Gear ratio: C, D, E, F     Stroke + 160*          +10 +11
 Gear ratio: G, H Stroke + 170* +10 +11


* Stroke length >400mm: EL+7mm, stroke length >700mm: EL +42mm
Axial backlash: +/- 0,5mm, generally length tolerance +/- 1mm

 WEIGHT OF THE ACTUATORS:

 Stroke length [mm]    
 50      100      150      200      250      300      350      400      500      750     
 Weight [kg] 0,8 0,9 1,0 1,1 1,2 1,3 1,4 1,6 1,8 2,3


Actual weight may vary depending on model and options selected.

CONNECTING PARTS "MOTOR-SIDE":
HINGE EYE

Saranasilmä1 e35 i

Aluminium
Code: A1M
Maximum static load: 5400N


Stainless steel (316)
Code: C1M
Maximum static load: 5400N

 

 

CONNECTING PART "PISTON-ROD-SIDE":
HINGE EYE

Saranasilmä2 e35 i

Aluminium
Code: A1K
Maximum static load: 5400N


Stainless steel (316)
Code: C1K
Maximum static load: 5400N

 

 

FOR THE FIXATION OF THE EASYE-LINE ACTUATORS WE OFFER THE FOLLOWING BRACKETS: 

Eel900ba35 2ks

EEL900BA35-2KS

Piston rod side
Max. load: 2200N
Order-No.: EEL900BA35-2KS

 
 
 
 
 
 
Eel900ba35 2ms

EEL900BA35-2MS

Motor side
Max. load: 2200N
Order-No.: EEL900BA35-2MS

 
 
 
 
 
 
 

RECOMMENDED MOUNTING METHODS

  • Do not clamp actuators on tubing
  • Always keep both brackets mounted in the same orientation and ensure to flush mount actuator
  • Brackets must always be able to rotate on axels in mountings

 

Easye asennus

PLEASE NOTE

  • Power supply without over-current protection can cause serious damage to the actuator at mechanical end-stop or when actuator is overloaded in another way
  • Radial forces might have an adverse affect on the performance or lead to damage of the actuator
  • Keep piston tube clean
  • Longer cable lengths may cause voltage drop which affects the performance of the actuator
    Max total cable length on 12VDC: 5 meters
  • The dust and water sealing of "harsh environment" actuators might affect their performance
  • All specifications are for 25 ºC ambient – low temperature might affect performance
  • Depending on load and application, nominal and actual stroke length may differ due to internal disc springs not being fully compressed

Installation of EasyE-I and programming of the Integrated Controller.

 

EASYE-I:N INSTALLATION
Download PDF file here.

 

 

INTEGRATED CONTROLLER PROGRAMMING
You can download software for integrated control programming here.